Weightlifting Belts

How Tight Should a Lifting Belt Be? (4 Rules To Follow)

how tight should a lifting belt be

If you’ve just purchased a lifting belt, you might be wondering how tight it should be in order to maximize its effectiveness.  

Lifting belts should be tight enough around the waist to provide support to the core without restricting your breathing. You should be able to take a deep belly breath and then forcefully press your core against the belt without raising your shoulders. If there is slack when fully inhaled, the belt is too loose.

Below, I’ll cover the main rules to follow when picking your belt tightness and some individual factors you should consider.

K​ey Takeaways

Will A Tighter Belt Allow You To Lift More Weight?

N​o, a tighter belt will not allow you to lift more weight.

A​ lifting belt is only as effective when used with the proper technique - tightness alone doesn't magically help you lift more. 

To wear the belt properly, you need to brace your core against it to create what’s called “intra-abdominal pressure”. 

Intra-abdominal pressure (IAP) is a steady pressure within the abdominal cavity by taking the air you inhale and actively forcing your stomach to expand outward, while at the same time holding your breath.  

If the belt is too tight, it will make it difficult or impossible to create this pressure because you won’t be able to inhale properly, which will be counterproductive to your lift.

A​ccording to Certified Personal Trainer and author Mike Matthews:

"​Simply strapping a belt on doesn’t accomplish [improved weightlifting performance]. You have to 'activate' it by pressing your abs out and against it as you perform the exercises, thereby increasing intra-abdominal pressure levels."

Rules For Determining How A Belt Should Fit


There are four rules for how a belt should fit: 

1. Make sure you get the right size belt that best suits your lifting needs  

    If you don’t already own a belt, the first step in identifying the optimal level of tightness relies on ensuring you’ve purchased a belt that is properly sized to your frame.  

    Every Gymreapers belt comes with a sizing chart that allows you to measure yourself over your belly button. 

    2. Make Sure To Have a Two-Thumb Fit

    lifting belt

      If you already have your belt, then place the belt around your waist and fasten the closure mechanism. 

      T​ake a deep, diaphragmatic breath, which involves pulling the air into your stomach.  Hold your breath, and at the same time forcefully exhale to create pressure in your abdominal cavity.  

      It should feel like you’re pushing your stomach in the same way you would when sitting on the toilet. 

      After this process, you should be able to fit two thumbs inside the belt.

      3. Your belt should be comfortable enough to breathe in and brace against it

        As you go through the process above, if anything hurts, or you have to raise your shoulders, then the belt is too tight. 

        4. I​f your belt is comfortable enough to keep fastened between sets, or on lifts you don't need it for, it is too loose.

          If you can sit on a bench in between sets while still having your belt fastened, then it wasn’t tight enough to begin with.  Don't make it a fashion piece.

          Does The Belt Type Impact The Tightness?

          lifting belt type

          T​he type of belt you use determines how tight it will feel, how much movement it allows, and how secure it will be. Material, closure type, and thickness will all contribute to how tight the belt feels. 

          1. Material

            Leather Belts

            L​eather belts are rigid, thicker, more durable, and therefore give the tightest fit. Leather tends to be very stiff when it is new which makes these belts fit very tight initially.  

            The leather will soften with use over time and conform to your body.  Once they are broken in they will fit more naturally, but still provide the most rigid support.  

            Nylon Belts

            N​ylon belts, on the other hand, are made of fabric that is flexible, thin, allows for a wide range of motion, and therefore gives a less tight fit compared with leather.  

            Nylon belts exchange some support for added comfort.  

            2. Closure type

            Lever Belt

            L​ever belts provide the tightest, most secure fasten.  However, they are prefixed and you need a screwdriver to adjust these styles of belts after initial sizing.

            This means that if you prefer a tighter fit for some lifts (as I’ll explain below), it will be difficult to adjust the lever on the spot.  

            Similarly, if you don’t work out at the same time every day, then lever belts might fit tighter or looser.  For example, if you workout at night one day, the lever belt will fit tighter because you have more food in your stomach compared with working out in the morning. 

            Prong Belt

            A prong belt is nearly as secure as a lever belt, but offers an easier way to adjust the tightness.   They fasten like a regular belt that you use to hold up your pants by pulling the strap through a loop and selecting a hole to secure the prong in.  

             If you prefer to fluctuate the tightness of your belt between lifts or day-to-day then a prong belt is best for you.


            Velcro belts are fastened with Velcro, as the name suggests.  The problem when trying to get a tight fit with these belts is that the “grip” wears out over time, and may open when under high pressure

            (Note: we've tested this with Gymreaper belts and the grip DOES NOT wear out over time, but if you decide to purchase a different brand then this is something to consider).  

            Therefore, these belts are naturally meant to be worn a bit looser when compared with prong and lever belts.

            3. Thickness

            T​he thicker the belt, the more rigid and tight the belt will feel simply because there is more material for you to press your core against.  

            At Gymreapers, we have 7mm, 10mm, and 13mm belts, where the 13mm belt will provide the most secure feeling.  

            With that said, most people prefer the 10mm belt for the balance between tightness and comfort.  

            When Would You Want A Looser Fitting Belt?

            There are three situations where you want a looser fitting belt: 

            Dynamic Exercises

            A​ looser fitting belt is helpful for dynamic exercises that cause heavier breathing or more movement. 

            For example, dynamic exercises could include full-body movements, such as the snatch and clean & jerk. 

            As well, if you’re moving quickly from one exercise to the next, such as a Crossfit workout where you’re moving from deadlifts to handstand push-ups, a looser fit will be more comfortable and offer longer term wear. 

            Exercises That Require Bending Over

            If your lift requires you to bend at your waist at all, a looser fit is also ideal.

            For example, on average competitive powerlifters prefer a looser fitting belt during the deadlift for greater range of motion and room to fully expand their abdomen.  

            Additionally, exercises that have you in a sustained position of being bent over, like a barbell bent over row, will usually warrant a looser fit, so you can continue to inhale under load without issue.

            If You Lift In The Evening

            E​veryone's body fluctuates throughout the day, so keep in mind that you may need a looser fit for evening sessions or after bulking-size meals

            This doesn’t mean that the belt should fit loose.  It means that if you were comparing your belt size hole in the morning vs night, then the night fit will probably be 1-2 holes looser - even though the belt will still feel similarly tight around your waist. 

            When Would You Want A Tighter Fitting Belt?

            lifting belt tight

            There are three situations where you want a tighter fitting belt:

            Static Exercises

            Static exercises can benefit from the extra stability of a tighter fitting belt and even prevent unwanted movement of the torso.

            Static exercises have limited motion, for example, bench pressing.  It is useful to have a tighter belt in this case because it will allow you to brace against the belt more and increase stability.

            As static exercises do not inflict heavy breathing like dynamic exercises, they allow for a tighter fitting belt.  However, it is important to still leave enough room to breathe comfortably - follow the two-thumb rule

            Exercises That Don’t Require Bending Over

            Your belt can have a tighter fit for lifts that don’t require bending over to provide maximum support without a limited range of motion.

            A tighter fitting belt is usually preferred unless it limits the movement of the lift or your breathing. Therefore, unless you have to bend your torso or breathe heavily during your exercise, it is safe to assume that a tighter fit is the way to go.

            Lifts That Require Spinal Loading

            A tighter fit during spinal loading will allow for more support in your core and more protection to your back.

            Most competitive lifters prefer a tight fitting belt for exercises that load weight onto the spine, such as squats or overhead press.  

            Belt Tightness Broken Down By Lift

            How Tight Should A Belt Be For S​quat?

            Lifters typically prefer their belts to be tighter for squats, especially for reps under 5 where you’re not going to work up heavy breathing. 

            It is also beneficial to have a tighter belt for squats as the load is directly onto the spine and your lower back may be more vulnerable with slight changes in technique.

            Test with little to no weight first to make sure your abdomen can comfortably expand at the bottom of your squat.

            How Tight Should A Belt Be For D​eadlift?

            A​s deadlifts require some bending of your torso, you should use a slightly looser fit.

            If your belt is too tight for deadlifts it can restrict your breathing, which limits your ability to brace.

            How Tight Should A Belt Be For S​natch?

            A​ snatch is a dynamic movement, so it is optimal to use a looser fit compared with an exercise like heavy squats, but the belt should still be snug.

            You want to leave room for movement so that your body can achieve a deep position at the bottom of the snatch.

            How Tight Should A Belt Be For B​ench Press?

            T​here is some debate around whether or not to use a belt while bench pressing, especially if you want to optimize your arch.

            However, a proper belt will support your arch and stabilize your serratus anterior (the muscles that wrap around your rib cage).  

            Your serratus anterior helps pull your shoulder blades down when bench pressing.  So if a belt can stabilize this muscle, it can take some pressure off your rotator cuff.

            The best lifters use a tight fit on their bench press, especially when going for a max lift.

            How Tight Should A Belt Be For C​lean and Jerk?

            W​ith the spinal loading of a clean and jerk, a tighter fit provides the best support, but not as tight as going for a max back squat.

            Be careful not to make it too tight as it can limit your dynamic movement and ability to take a breath before you jerk the barbell overhead.

            Are There Risks If A Belt Is Too Tight?

            Y​es, a lifting belt that is too tight can restrict breathing and limit your ability to brace your abdominals. It can also cause heartburn and indigestion as it will squeeze your digestive organs. 

            I​f the tightness of your belt interferes with your ability to brace your abdominals, it will reduce your intra-abdominal pressure and power to lift. This will cause a negative effect on your lifting abilities and be one of the reasons you fail a max lift. 

            Tips For Adjusting & Wearing Your Lifting Belt

            adjusting lifting belt

            D​on't wear your belt on exercises that don't require it

            In fact, if you are comfortable enough to wear your belt for unnecessary lifts such as bicep curls or calf raises, your belt is too loose.

            W​here to position your belt

            Y​our belt should be worn over the center of your belly button, below your ribs, and above your hips. 

            You may want to wear it slightly lower for lifts that load heavily onto your lower back- such as squats. 

            It may irritate your ribs or hips at first as you break in your belt and get used to it, but readjust or use a smaller width if it interferes with your movement or causes pain. 

            G​etting used to your belt

            U​tilizing a belt in lifting requires some getting used to. It will likely be uncomfortable until you break it in.  Don’t be discouraged if you don’t love it on your first use.

            A​ccording to three-time world record powerlifter Greg Nuckols:

            "​For the most part, belts are not comfortable. Belts start off being very stiff and can take some time to be 'broken in.' Expect to get some bruising on the top of your hip bone or along your ribs from the belt digging into you during this process."

            F​luctuation of belt settings

            L​ifting at the same time every day and after a similar meal will give you a better practice of how tight your belt should be. 

            Bloating fluctuates throughout the day and depends on what you have eaten.  Especially if you have a lever closure which is not easily adjustable- it will be easier to be consistent than carry a screwdriver in your gym bag. 

            D​on't let your ego interfere with which setting you select on your belt.  Afterall, having an optimal lift is more impressive than cinching your waist one hole tighter anyways!

            Frequently Asked Questions

            Is a Lever Belt Tighter Than a Prong Belt?

            A​ lever closure can give a tighter fit than a prong belt since it is not easily adjusted when your body fluctuates. Both closures are of the highest security and will provide a tight fit feel.  

            W​ill a tighter belt protect my spine from injury?

            N​o, a tighter belt does not prevent spinal injury. A properly fitting belt will assist in creating intra-abdominal pressure to protect your spine and provide a rigid support on your back to prevent rounding.

            H​ow do I know when to wear my belt while lifting?

            It's best to wear your belt on compound exercises when you reach a weight with a five rep max.  You should utilize your belt for your heaviest sets (five rep max or heavier) and a few beforehand to warm up your abdominals and prepare your body for the increased pressure from your belt.

            What To Read Next

            Once you have the proper fit of your belt, it’s time to master the proper use and technique of your belt.

            Looking for a new belt? Shop Lifting Belts Now

            Reading next

            10mm vs 13mm Belt
            Lever vs Prong Belt

            Leave a comment

            All comments are moderated before being published.

            This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

            Customer service

            Available M-F, 8:00am to 5:00pm (MST)
            (208) 203-7498 | Live Chat

            Free Shipping On Orders $150+

            Free US Domestic Shipping when you spend $150 or more!

            EASY RETURNS

            Buy with confidence and enjoy painless, hassle-free returns!

            Secure payment

            Shop safely and securely knowing your experience is protected.